Safety
9
Risk from loose chippings
Keep a safe distance from the machine. Do not allow any persons
near the machine when it is working. If the guard is damaged, it must
be replaced.
Danger of being crushed by the machine's cutting unit
The safety valve must always be closed during repair or maintenance
operations on the machine's cutting unit. The tractor must always be
stationary, with the ignition key removed before repair or maintenance
operations are undertaken on the machine.
Danger: rotating machine parts
Children must never be allowed near the machine. Only the operator
is allowed near the machine.
Risk of injury to feet
The safety guard must always be in place when the machine is
working.
Risk of injury to feet
The safety guard must always be in place when the machine is
working.
To Next Page
Loading...
