Vicon Extra 832R PRO - Page 91

Maintenance
91
CR model
 Turn the PTO shaft until the grease nipple is visible.
 Press the nozzle of the grease gun over the grease nipple.
 Pump the grease gun once or twice (max.).
 »Maintenance intervals« Page 84
 »Lubricants« Page 177
 Move the cover to the side.
 Turn the PTO shaft until the grease nipple is visible.
 Press the nozzle of the grease gun over the grease nipple.
 Pump the grease gun once or twice (max.).
 Move the cover back.
 »Maintenance intervals« Page 84
 »Lubricants« Page 177
 Turn the PTO shaft until the grease nipple is visible.
 Press the nozzle of the grease gun over the grease nipple.
 Pump the grease gun once or twice (max.).
 »Maintenance intervals« Page 84
 »Lubricants« Page 177
 Turn the PTO shaft until the grease nipple is visible.
 Press the nozzle of the grease gun over the grease nipple.
 Pump the grease gun once or twice (max.).
 »Maintenance intervals« Page 84
 »Lubricants« Page 177
58.237.000
58.237.000
58.237.000
58.237.000