I. General
It is a 3 3/4-bit digital clamp meter of automatic
range conversion and a high-reliability digital clamp
multimeter with stable performance and driven by
battery. It adopts 16mm font height LCD display of
clear readings. With the functions of data holding and
automatic power-off, it is more convenient to use.
This meter can be used to measure such parameters
as DCV, ACV, DCA, ACA, resistance, capacity,
frequency, diode, continuity test, etc. Centered on the
dual slope A/D conversion of large-scale integrated
circuit, the whole set has the function of automatic
range conversion and thus is a meter with excellent
performance and a desirable tool for labs, factories,
radio fans and homes.
Warning: Before use, please read carefully
the information under “Safety Notices”.
To Next Page
