Victor 6056B - III. Safety Notices; Measurement Conversion and Low Battery Warning; IV. Common Electric Symbols; Understanding Common Electrical Symbols

5
be sure to disconnect the test probe cable from the
tested item and make sure there are no signals input
into the input end. Never convert the function/range
selection switch during measurement.
10. When the LCD display shows “ ”, please
replace the battery in time to ensure the
measurement accuracy.
11. Do not change the circuits of this meter without any
permission to avoid damaging this meter and
endangering safety.
IV. Common Electric Symbols
Warning!
DC
High voltage!
Danger!
AC
Ground
AC/DC
Double
insulation
European
directives
complied
Low battery
Fuse