Victor CUTMASTER User Manual

CUTMASTER 35MM
Manual 0-5082 GENERAL INFORMATION
1-7
Steve Ward V.P. Europe and General Manager
Address: Victor Technologies International Inc.
Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX
Date: March 18, 2014
Steve Ward
Full Name
V.P. Europe and General Manager
(Position)
(Signature)
1.07 Declaration of Conformity
Declaration of Conformity
We Victor Technologies International Inc.
of 16052 Swingley Ridge Road
Suite 300
Chestereld, MO 63033 U.S.A.
in accordance with the following Directive(s):
 •2006/95/EC The Low Voltage Directive
 •2004/108/EC The Electromagnetic Compatibility (EMC) Directive
hereby declare that:
Equipment: Plasma Cutting Power Source
Model Name/Number: CutMaster 35MM
Market Release Date: January 16,2014
is in conformity with the applicable requirements of the following harmonized standards:
  •  EN 60974-10:2007 Arc Welding Equipment - Part 10: Electromagnetic compatibility (EMC)
requirements
  •EN 60974-1:2012 Arc Welding Equipment - Part 1: Welding power sources.
Classification: The equipment described in this document is Class A and intended for industrial use.
Classification: The equipment described in this manual is Class A and intended for industrial use.
!
WARNING
This Class A equipment is not intended for use in residential locations where the electrical power is provided
by the public low-voltage supply system. There may be potential difculties in ensuring electromagnetic
compatibility in those locations, due to conducted as well as radiated disturbances.

Victor CUTMASTER Specifications

General

Brand	Victor
Model	CUTMASTER
Category	Welding System
Language	English