EasyManua.ls Logo

Victory Spa Tonga - Galapagos Power Consumption; Overcurrent Switch B16; Cabins Power Consumption

Default Icon
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ATTENTION: All devices constituting hydromassage system are one-phased powered with ~230 V; 50 Hz
current.
Overcurrent switch B16
of pole number equal = number of phases + N
Cabin must be connected with use of a differential switch of In=0,03A.
It can be realised as overcurrent switch with differential module.
Power supply from 2 or accordingly 3 phases is preferable it can be also connected into existing one-phase
installations ( but this is not recommended by producer TECHNIC INDUSTRY, due to too high power )
by connecting phase wires of bath power lead with phase wire of power lead accordingly higher overcurrent
protection must be applied.
WARIANT
MAXIMUM
POWER
OVERCURRENT
PROTECTION
POWER LEAD
in electric
installation
1
2
3
4
1 Phase
3 Phases
3 Phases
3 Phases
B16
B16 / Phase
C16 / Phase
C16 / Phase
2
3x2,5 mm
2
5x2,5 mm
2
5x2,5 mm
2
5x2,5 mm
15
ENGLISH
CONNECTION
METHOD
2135 W
7950 W
9405 W
9415 W
Cabins power consumption
CABIN
MAXIMUM
POWER
ORINOCO
MISSISSIPI
AMAZON
CASSIOPEIA
3500 W
2700 W
3500 W
3500 W
Galapagos power consumption

Table of Contents

Related product manuals