POWER CONNECTION
Power connection of a bath must be carried out by an installation
company certified by TECHNIC INDUSTRY. Connection of electric
installation into a bath must be carried out in accordance with the
EN-60335-1 standard. It must be carried out permanently i.e. it is
forbidden to finish a bath power lead with a plug and then plug in into a
socket!
Attention! A bath is equipped with power leads of the following colours:
a) 1 phase connection:
phase wire L : brown
zero lead N : blue
safety lead : yellow-green.
b) multi-phase connection:
phase wires L : black or brown – with proper numbers
zero lead N : blue
safety lead : yellow-green.
Attention! Bath aluminium frame must be grounded. Clamps of a
grounding lead and a compensating lead are clearly indicated on
aluminium frame.
7
ENGLISH
To Next Page
Loading...
