Victron energy MultiPlus-II GX User Manual

11. Configuring the Product
The following hardware is required:
Either
• A MK3-USB (VE.Bus to USB) interface and RJ45 UTP cable.
• A connection to the internet and VRMVictron Remote Management account to use Remote VEConfigure.
Note that firmware updates require use of the MK3-USB and cannot be performed remotely.
11.1. VEConfigure PC software
Configuration of the product is performed with a tool called VEConfigure. It is essential to read the seperate VEConfigure man-
ual and undertake Victron training for safe use of this tool.
11.2. VE.Bus Quick Configure Setup
VE.Bus Quick Configure Setup is a software program with which systems with a maximum of three Multis (parallel or three
phase operation) can be configured in a simple manner.
The software can be downloaded free of charge at www.victronenergy.com
11.3. VE.Bus System Configurator
For configuring advanced applications and/or systems with four or more Multis, VE.Bus System Configurator software must be
used. The software can be downloaded free of charge at www.victronenergy.com
MultiPlus-II GX
22

Victron energy MultiPlus-II GX Specifications

General

Brand	Victron energy
Model	MultiPlus-II GX
Category	UPS
Language	English