Need help?Do you have a question about the VIDAR DiagnosticPRO Edge and is the answer not in the manual?
General| Power Supply | 100-240 VAC, 50/60 Hz |
|---|---|
| Type | Digitizer |
| Technology | CCD (Charge-Coupled Device) |
| Grayscale Resolution | 16-bit |
| Film Sizes | Up to 14" x 17" |
| Interface | USB 2.0 |
| Image Resolution | Up to 400 dpi |
| Operating Temperature | 10-40°C |
| Storage Temperature | -20°C to 60°C |
Procedure for turning the digitizer on, off, and preparing for scanning.
Details about the types, sizes, and preparation of films for digitization.
Instructions for loading and scanning multiple films using the automatic feeder.
Steps to prepare the digitizer for scanning films exceeding 17 inches in length.
Guidance on supporting long films during scanning and reverting to standard mode.
Overview of LED indications during normal digitizer operation and status.
Details and cautions regarding the use of the power adapter and electrical supply.
Troubleshooting steps for specific error conditions indicated by LED lights.
Solutions for common operational issues like film skewing or misfeeds.
Guidance on how often the DiagnosticPRO Edge digitizer should be maintained.
Instructions for cleaning dust and lint from the multi-film feed tray components.
Procedure for cleaning the diffuser, often to resolve image streaks.
Information on ordering and replacing the LED cartridge for the digitizer.
Declarations and test specifications for electromagnetic immunity of the device.
To Next Page
