PAGE 21 of 40 GSM DOOR INTERCOM TECHNICAL MANUAL VER 2.0.8
1111NODnn Store the time nn = time in days.
1111NODnn? Store the time nn = time in days. Also send a
confirmation text back to the sender.
1111NOD? Query the current stored time. A text message will be
sent to the sender showing the stored time.
DIVERT TIME (DIT)
The divert time is the number of seconds to wait for a call to be answered before diverting
to the second number (The divert facility must be set for this to work). The default time is
15 seconds (The count down begins from when the call button is pressed, but is refreshed
when the telephone begins to ring) and can be set to 01 – 99 seconds).
1111DITnn Store the time nn = time in seconds.
1111DITnn? Store the time nn = time in seconds. Also send a
confirmation text back to the sender.
1111DIT? Query the current stored time. A text message will be
sent to the sender showing the stored time.
FORCED DIAL (DLE)
A useful feature of the Intercom panel is its ability to call a number sent to it in a text
message. This feature can be used when setting up the SIM card. For example, disabling
the voicemail facility or disabling automatic SMS messages or missed calls. Any number
up to 15 digits can be called and the call will last for a maximum of 40 seconds. The
example below would switch off voicemail on a Vodafone SIM card. Substitute the
Vodafone number for other service providers (See important note on page 19).
1111DLE”1210“ Dial 1210 for the intercom panel
Other useful numbers which can be used with this feature are as follows. Please also
check the service provider’s web sits for other useful codes.
Vodafone O2
Disable voicemail 1210 1760
Disable text alerts #148# 1760
NOTE: Disabling voicemail and text alerts is very important as there is no way to retrieve
either of these services from an intercom panel. Disabling these features will also prevent
the intercom panel switching to voicemail or sending a text when dialling in from another
phone.
STORE SMS AUXILIARY MESSAGE (SMS)
When g & 4 (Auxiliary 2 input) are shorted on the intercom panel, a text message will be
sent to the master telephone number. The text message can be customised using the
following message:-
1111SMS”HouseAlarm” Change message to HouseAlarm
Note: The message can be a maximum of 32 characters long and can not include spaces or “.
To Next Page
Loading...
Need help?
General
