Videx VX2200 - FUNCTIONAL DOOR PANELS

66251435-EN - V1.1 - 15/10/16
13
VX2200 Digital System “6 Wire” BUS Video - “2 Wire” BUS Audio
Art.CST2220 - Operating Instructions
Art.CST2220 VX2200 IP Concierge Station GUI instruction sheet
CALL APARTMENT
Fig. 41 Call Apartment - Apartment List Fig. 42 Call Apartment - Call selected apartment
Fig. 43 Call Apartment - Apartment connected Fig. 44 Call Apartment - Apartment Intercommunications
To call an apartment, the operator must press the "Call Apartment" button (Fig. 6 on page 3 third button from left). The screen
will show the list of apartments (Fig. 41) that are connected to the Art.2220 currently selected (Fig. 6 on page 3 fth button from
left).
Select the apartment from the list (Fig. 41) or search using the name or at elds at the top of the screen. When searching by name
or at a keypad will appear. To close the keypad use the button
).
Tap on the selected apartment (Fig. 42) then press the
button.
Once the apartment is connected (Fig. 43), the operator can:
Redirect the connection to another apartment by pressing the
Redirect
button to allow intercommunication.
Close the call by pressing the
Close Call
.
When the operator press the
Redirect
button, it will be possible to search for a destination apartment as described above: select the
destination apartment then press the
button to make the call.
Once the intercommunication is in progress (Fig. 44) the operator, at any time, can close the communication by tapping on it then
pressing the
button.