Vitodens 200-W B2HA 80 to 100, 285 to 352 Installation
5685 827 - 14
8
Applicability
General Information
When ordering replacement parts, provide either the
16-digit boiler serial number (on the bar code label) or
the 12-digit ASME/NB serial number, located as shown
underneath boiler front enclosure panel. Refer to page 15
for instructions on how to remove front enclosure panel.
NG and LPG
Model No. B2HA 80, 285
Serial No. 7554705 jjjjjjjjj
Model No. B2HA 88, 311
Serial No. 7554706 jjjjjjjjj
Model No. B2HA 100, 352
Serial No. 7554707 jjjjjjjjj
Product Information
CAUTION
The boiler serial number must be provided when
ordering replacement parts. Some replacement parts are
not reverse compatible with previous versions of the
Vitodens 200-W B2HA boiler.
IMPORTANT
A Inox-Radial heat exchanger made from stainless steel
– for high operational reliability and a long service life.
Large heating output in the smallest of spaces
B Modulating MatriX DHW tank burner for extremely
clean combustion and quiet operation
C Variable speed combustion fan for quiet and
economical operation
D Gas and water connections
E Digital boiler control unit
Natural gas-fired wall-mounted condensing heating boiler
for weather-responsive operation in closed loop, forced
circulation hot water heating systems for space heating
and domestic hot water (DHW) production.
Models B2HA 80 to 100, 285 to 352 are for operation
with natural gas. For a fuel conversion to liquid propane
gas refer to the service instructions for details.
Boiler model must be selected based on an accurate heat
loss calculation of the building. Ensure boiler model is
compatible with connected radiation.
Vitodens 200-W, B2HA boilers are factory-tested and
calibrated. Further gas valve adjustments are not
typically required during field start-up.
Multi boiler system
In connection with the installation of a multi boiler system
observe the installation instructions of the multi boiler
system accessories.
Product may not be exactly as shown
To Next Page
Loading...
