70
1395.1 "Heating limit: Economy function, outside temperature, heating circuit 1"
Setting Explanations
Heating circuit pump logic function (summer economy
control): Heating circuit pump switches off when out-
side temperature 1 K above selected value. Heating
circuit pump switches back on when outside tempera-
ture 1 K below selected value.
25 °C 25 Delivered condition: Heating limit at outside tempera-
ture 25 °C
10 to 35 Heating limit adjustable from 10 to 35 °C in 1 °C incre-
ments
1396.1 "Heating limit: Economy function, outside temperature, heating circuit 2"
Setting Explanations
Heating circuit pump logic function (summer economy
control): Heating circuit pump switches off when out-
side temperature 1 K above selected value. Heating
circuit pump switches back on when outside tempera-
ture 1 K below selected value.
25 °C 25 Delivered condition: Heating limit at outside tempera-
ture 25 °C
10 to 35 Heating limit adjustable from 10 to 35 °C in 1 °C incre-
ments
1397.1 "Heating limit: Economy function, outside temperature, heating circuit 3"
Setting Explanations
Heating circuit pump logic function (summer economy
control): Heating circuit pump switches off when out-
side temperature 1 K above selected value. Heating
circuit pump switches back on when outside tempera-
ture 1 K below selected value.
25 °C 25 Delivered condition: Heating limit at outside tempera-
ture 25 °C
10 to 35 Heating limit adjustable from 10 to 35 °C in 1 °C incre-
ments
Subscriber numbers of connected extensions
All extensions connected to the heat generator (except
the SDIO/SM1A electronics module) must have a sub-
scriber number. The subscriber number is set on rotary
switch S1 at each extension.
System configuration (parameters)
Heating circuit 1, Heating circuit 2, Heating… (cont.)
6151778
Parameter
To Next Page
Loading...
