EasyManuals Logo

Viessmann CIB User Manual

Viessmann CIB
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
48
Coding in the delivered condition Possible change
52:0 Without low loss header sensor 52:1 With low loss header sensor (auto-
matic recognition)
53:1 Function, connection 28 at internal
H1 extension
53:0 Central fault message
53:1 DHW circulation pump (delivered
condition)
53:2 External heating circuit pump
53:3 Cylinder loading pump
54:0 Without solar thermal system 54:1 With Vitosolic 100 (automatic recog-
nition)
54:2 With Vitosolic 200 (automatic recog-
nition)
54:4 With solar control module SM1 with
auxiliary function, e.g. central heat-
ing backup (automatic recognition)
6E:50 No correction of measured outside
temperature (only for weather-
compensated control units)
6E:0
to
6E:100
Outside temperature correction in
0.1 K steps
0 to 49 = -5 K to -0.1 K
51 to 100 = 0.1 K to 5 K
76:0 Without LON communication mod-
ule
76:1 With LON communication module
(automatic recognition)
77:1 LON subscriber number, if LON
communication module is installed
77:2
to
77:99
LON subscriber number, adjustable
from 1 to 99:
1 - 4 = Boiler
5 - 9 = Never adjust
10 - 90 = Vitotronic 200-H
98 = Vitogate
99 = Vitocom
Note
Allocate each number only once.
79:1 With LON communication module:
Control unit is fault manager.
79:0 Control unit is not fault manager.
7B:1 With LON communication module:
Control unit transmits the time.
7B:0 No time transmission.
7F:1 Detached house
(only for weather-compensated
control units)
7F:0 Apartment building
Holiday program and time program
for DHW heating can be set sepa-
rately
80:6 A fault message is issued if the
fault lasts for at least 30 s.
80:0 Immediate fault message
80:2
to
80:199
Minimum fault duration until fault
message occurs, adjustable from
10 s to 995 s, 1 step 5 s
81:1 Automatic summer/wintertime
changeover
81:0 Manual summer/wintertime change-
over
81:2 Use of the radio clock receiver (au-
tomatic recognition)
81:3 With LON communication module:
Control unit receives the time.
82:0 Operation with natural gas 82:1 Operation with LPG (only adjustable
if coding address 11:9 has been set)
86: Never adjust.
Code 2
General/Group "1" (cont.)
5839829
Codes

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Viessmann CIB and is the answer not in the manual?

Viessmann CIB Specifications

General IconGeneral
BrandViessmann
ModelCIB
CategoryBoiler
LanguageEnglish

Related product manuals