EasyManuals Logo

Viessmann TectoCell Standard Plus 80 User Manual

Viessmann TectoCell Standard Plus 80
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Transport
5777744-03 GB Subject to technical changes!
3 Transport
 Only carry room elements from the bottom to pre-
vent panels from separating.
3.1 Delivery
Delivery condition:
Delivery in individual packaging units
Individual elements must be marked with stickers
or numbers.
Thedoorpanel(single-leaf)ispre-mountedin
the door frame.
The following are built into the door frame:
Control panel
Moisture-proof luminaries
Junction box
Mounting accessories are packaged separately.
The control panel contains:
Light switch
Thermometer
Pressure equalisation valve
Door frame heating and pressure compensation
valve(optionalforwallthickness80)
3.1.1 Unpacking
Before and during the unpacking:
 comply with the safety and environmental regula-
tions at the installation site.
 Check TectoCell cold rooms and deep-freezing
rooms for transport damages with a visual inspec-
tion.
 In order to process warranty claims, report faults
(withphotos,forinstance)tothemanufacturerand
indicate the manufacturer number and type designa-
tion.
 "Provisions in the event of damage" must be ob-
served!
 Observe the "General conditions for transport dam-
age and hidden transport damage".
 Check packaging material for loose parts after
unpacking.
 Dispose of packaging material in an environmentally
compatible way according to local regulations.
NOTE
Damage to the door!
f If no door stop has been installed,
please make sure to carefully open
the door in order to prevent dam-
ages to the door or the wall.
NOTE
Damage from defective cold
rooms and deep-freezing rooms!
f Ensure that only trained
qualiedpersonneloperatethe
Tecto cold rooms and deep-free zing rooms.
f Use TectoCell cold rooms and
deep-freezing rooms exclusively in
original condition without unauthor-
izedmodicationsandintechnically
perfect condition.
 Follow Installation and Operating Instructions.
 Have mounting, maintenance, cleaning, and repair
work performed exclusively by trained specialists.
2.1 Intended use
Use the TectoCell cold rooms and deep-freezing rooms
exclusively for cooling suitable refrigerated products.
Use TectoCell cold rooms and deep-freezing rooms
exclusively for:
commercial purposes
forthespeciedtemperaturerange
for stationary use
2.2 Foreseeable Misuse
Do not use TectoCell cold rooms and deep-freezing
rooms for mobile uses.Do not install
TectoCell cold rooms and deep-freezing rooms in
areas exposed to the effects of weathering.
Any use which does not comply with the conditions of
use discussed during the sales process is deemed to
be misuse.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Viessmann TectoCell Standard Plus 80 and is the answer not in the manual?

Viessmann TectoCell Standard Plus 80 Specifications

General IconGeneral
BrandViessmann
ModelTectoCell Standard Plus 80
CategoryRefrigerator
LanguageEnglish

Related product manuals