ViewSonic CDE5520 - Time

19
DVI Audio in
Select the audio input source.
Analog: audio from audio input
Digital : audio from DVI audio.
Audio reset
Reset all settings in the Audio menu to factory
preset values.
6.1.4. Time
O󰀨Timer
Set automatically power o󰀨 time (in hours).
Date and time
Adjust the current date and time for the display’s
internal clock.
Schedule
This function allows you to program up to 7 (seven)
di󰀨erent scheduled time intervals for the display to
activate.
Schedule list:You can set 7 schedules.
• Enable: Enable/disable schedule. If set start/
end time is conflict or empty, input is empty
or time conflict with other schedule list, you
cannot enable schedule.
• Start time: Set start time.
• End time: Set end time.
• Input: Platform will go to this select source
automatically after the schedule on.
• Days of the week: Set Sunday,
Monday,Tuesday, Wednesday, Thursday,
Friday, Saturday.
• Every week: Set lifecycle.
• Back: Does not change schedule data.
• Save: Save schedule data.
Slideshow interval
Setting the photo slideshow interval for USB auto
play.
OSDturno󰀨
Set the period of time the OSD (on-screen display)
menu stays on the screen.
The options are: {O󰀨, 5 ~ 120} seconds.
*{0󰀨} does not disappear automatically.
Information OSD
Set the period of time the information OSD is
displayed on the upper left corner of the screen.
The information OSD will display when input signal
is changed.
The information OSD will remain on the screen
with {O󰀨} selection. The options are: {1 ~ 60}
seconds.
Time reset
Reset all settings in Time menu to the factory
preset values.