ViewSonic CDE5520 - About

21
Switch on state
Select the display status used for the next time
you connect the power cord.
• {Power off} - The display will remain off when
the power cord is connected to a wall outlet.
• {Forced on} - The display will turn on when the
power cord is connected to a wall outlet.
• {Last status} - The display will return to the
previous power status
WOL
Choose to turn on or o󰀨 the wake on LAN function.
Choose from : {O󰀨} / { On}
Monitor ID
Set the ID number for controlling the display via
the RS232C connection. Each display must have
a unique ID number when multiple sets of this
display are connected. Monitor ID number range is
between 1 to 98. 99 is reserve for all display.
Language
Select the language used in the OSD menu.
The options are: English/Deutsch/
简体中文
/
Français/Italiano/Español/ Pyccкий/Polski/Türkçe/
繁體中文
.
Factory reset
Reset all settings in the OSD menus of {Picture},
{Screen}, {Audio}, {Time},
and {Advanced} to the factory preset values.
Advanced option reset
Reset all settings in the Advanced menu to factory
preset values.
6.1.6. About
Heat status
This function allows you to check the thermal
status at any time.
Monitor information
Shows information about your display, including
model number, serial number, operating hours and
software version.