ViewSonic IFP30 Series User Manual

2727
Using Your ViewBoard

1. Ensure the power cord is connected, plugged into a power outlet, and the power
switch is in the “On” posion.
LAN 2RS232 AUDIO OUTPC AUDIO VGA
2. Press the Power buon to turn on the ViewBoard.
3. To turn the ViewBoard o, press and hold the
Power buon on the device or
press the Power buon on the remote control.
The Power switch is located at the
boom of the unit.
The AC Power input is located on
the right side of the unit.

ViewSonic IFP30 Series Specifications

General

Brand	ViewSonic
Model	IFP30 Series
Category	Monitor
Language	English