ViewSonic IFP30 Series - Channel Setting; Input Channel Alias Switch; Power on by Active Source; Signal Auto Search

6363

Enable/disable Input Alias Switch, Power On by Acve Source, Signal Auto Switch,
and Auto Switch to a New Source.
Input Channel Alias Switch
Once enabled, the user can edit input aliases and when the Display buon is
pressed the source informaon (located in the upper le side) will also be changed.

The ViewBoard will detect acve signals in Standby mode. If there is a signal output,
the ViewBoard will power on automacally.
 Only supports HDMI 3 and VGA.
Signal Auto Search
When enabled, if the ViewBoard loses its current input source signal, it will search
for another input source automacally.
Auto Switch to new Source
When enabled, if the ViewBoard detects a new signal input it will switch the input
source automacally.