105
Certain components of products as stated above are exempted under the Annex
• Copper alloy containing up to 4% lead by weight.
• Lead in high melng temperature type solders (i.e. lead-based alloys containing
85% by weight or more lead).
• Electrical and electronic components containing lead in a glass or ceramic other
than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or
ceramic matrix compound.
• Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC
or higher.
ENERGY STAR® statement
ENERGY STAR® is a U.S. Environmental Protecon Agency voluntary program
that helps businesses and individuals save money and protect our climate
through superior energy eciency. Products that earn the ENERGY STAR®
prevent greenhouse gas emissions by meeng strict energy eciency criteria or
requirements set by the U.S. Environmental Protecon Agency.
As an ENERGY STAR® Partner, ViewSonic is determined to meet the ENERGY STAR®
Guidelines and mark all cered models with the ENERGY STAR® logo.
The following logo appears on all ENERGY STAR®-cered models:
The power management features signicantly reduce energy
consumpon when the product is not in use. Power management allows
the device to automacally enter a low power “sleep” mode aer a
dened period of inacvity. And the power management features also
enter Sleep Mode or O Mode within 5 minutes of being disconnected
from a host computer. Please note any change in energy sengs will
increase energy consumpon.
Restricon on Hazardous Substances statement (India). This product complies
with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in
concentraons exceeding 0.1 weight % and 0.01 weight % for cadmium, except for
the exempons set in Schedule 2 of the Rule.
To Next Page
Loading...
Need help?
General