24
To connect to a media player:
1. Connect an HDMI cable to the HDMI ports (or connect a DisplayPort cable to the
DisplayPort port) on your ViewBoard and peripheral device.
2. Plug in the power cord of your ViewBoard, and turn on the power supply switch.
3. Press the
Power button on the right-hand side of the ViewBoard to turn the
screen on.
4. Press the INPUT button on the remote control and switch to the “HDMI” input
source.
• HDR is not supported on the IFP30 series.
• HDMI 1/2/3 supports up to 3840 x 2160 @ 60Hz
• DisplayPort supports up to 3840 x 2160 @ 60Hz
To Next Page
Loading...
