ViewSonic IFP6530

4242
Adjust
1. Press u on the remote control and select the Adjust menu.
2. Press q/p/t/u on the remote control or directly touch the opon to select it.
3. Adjust the H Posion, V Posion, Clock, or Phase directly by touching and
adjusng each value, or with the remote control by pressing ENTER and using
t/u to adjust the opon.
4. Touch the AUTO buon directly to automacally adjust the values.
5. Press BACK on the remote control, or touch a blank area outside of the menu to
exit.
 These sengs are only available when the input signal is VGA.