ViewSonic IFP6530

3737

To select an Input Source:
1. Press INPUT on the remote control, gesture, or use the tool bar to display the
General Setting menu.
2. Press q/p/t/u to select the input source you want.
3. Press ENTER on the remote control, or touch the input source.
4. Press BACK on the remote control, or touch a blank area outside of the menu to
exit.
 PC source will only display when the slot-in computer is connected.
To adjust the Backlight and enable/disable Flicker-Free:
1. Press INPUT on the remote control, gesture, or use the tool bar to display the
General Setting menu.
2. Drag the brightness slider directly to adjust the backlight value, and/or touch the
Flicker-Free icon to enable/disable the function.
3. Press BACK on the remote control, or touch a blank area outside of the menu to
exit.