46
Shutting down the projector
1. Press POWER and a confirmation message
is displayed prompting you.
If you don't respond in a few seconds, the
message will disappear.
2. Press POWER a second time.
3. Disconnect the power cord from the wall
socket if the projector will not be used in an
extended period of time.
CAUTION
• To protect the lamp, the projector will not respond
to any commands during the cooling process.
• Do not unplug the power cord before the projector
shutdown sequence is complete.
ZOOM
TEMP
LMMP
MODE
ENTER
AUTO
S
OURCE
POWER
MENU
EXIT
TEMP
LMMP
MODE
ENTER
AUTO
SOURCE
MENU
EXIT
POWER
To Next Page
Loading...
