ViewSonic PJD5123p User Manual

51
Function Description
Color Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
picture mode" on page 32 for details.
Reference
Mode
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See "Setting the User 1/User 2
mode" on page 33 for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on
page 34 for details.
Contrast
Adjusts the degree of difference between dark and light in the
image. See "Adjusting Contrast" on page 34 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 34 for details.
Tint
Adjusts the red and green color tones of the image. See "Adjusting
Tint" on page 34 for details.
The function is only available when Video or S-Video with
NTSC system is selected.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 34 for details.
Brilliant
Color
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 34 for details.
Color
Temperature
See "Selecting a Color Temperature" on page 34 for details.
Save
Settings
Saves the settings made for the User 1 or User 2 mode.
Quick Auto
Search
See "Switching input signal" on page 27 for details.
Color Space
Conversion
See "Changing Color Space" on page 27 for details.
Smart Eco
Timer
Allows the projector to decrease the power consumption
automatically if no input signal is detected after a set period of time.
It takes the projector 4 minutes after it is turned on or
resumed to initiate the function.
Smart
Restart
Selecting On enables you to restart the projector immediately
within 150 seconds after turning it off.
It takes the projector 4 minutes after it is turned on or
resumed to initiate the function.
Pattern
The projector can display several test patterns. It helps you adjust
the image size and focus and check that the projected image is free
from distortion.
My Button
Sets a hotkey on remote control.
2. PICTURE menu
3. SOURCE menu
Downloaded From projector-manual.com Viewsonic Manuals

ViewSonic PJD5123p Specifications

General

Brand	ViewSonic
Model	PJD5123p
Category	Projector
Language	English