ViewSonic PJD5133 User Manual

Appendix
LED Indicator Messages
LED Type Color Status Meaning
Power LED Blue Solid Standby mode when green mode is turned on.
Temp/Lamp
LED
Blue/Red Off
Power LED Blue Flash Standby mode when green mode is turned off.
Temp/Lamp
LED
Blue/Red Off
Power LED Blue Solid Powering up
Temp/Lamp
LED
Blue/Red Off
Power LED Blue Solid Normal operation
Temp/Lamp
LED
Blue/Red Off
Power LED Blue Flash Powering down
(The projector needs to cool for 35 seconds after
the projector is turned off.)
Temp/Lamp
LED
Blue/Red Off
Power LED Blue Flash The projector system has some problems with its
fans, so the projector cannot start up.
Temp/Lamp
LED
Magenta Flash
Power LED Blue Solid The lamp has reached its end of life and must be
changed soon. The lamp will continue to operate
until it fails. Change the lamp. If the lamp is off,
then the ballast will become malfunction.
Temp/Lamp
LED
Lamp
(Red)
Flash
Power LED Blue Solid 1. Temperature is too high. The lamp will turn off.
The fan motor is cooling the lamp.
Or
2. The cooling process is not complete after the
peojector is shut down and re-started right away.
Temp/Lamp
LED
Temp
(Blue)
Flash
Power LED Blue Solid The lamp ignition failed. If temperature is too high,
the fans will cool the lamp.
Temp/Lamp
LED
Magenta Flash
38

ViewSonic PJD5133 Specifications

General

Matrix size	0.55 \
Number of colors	16.78 million colors
Native aspect ratio	4:3
Projection distance	1.2 - 10 m
Vertical scan range	50 - 120 Hz
Projection technology	DLP
Supported aspect ratios	4:3, 16:9, 16:10
Contrast ratio (typical)	2000:1
Screen size compatibility	27 - 300 \
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	± 40 °
Power LED	Yes
Audio input	1
Aspect ratio	16:10
Compatibility	PC, Mac
Dimensions (WxDxH)	284 x 234 x 82 mm
Connectivity technology	Wired
Focus	Manual
Optical zoom	1.1 x
Focal length range	- mm
Lamp power	180 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	6000 h
DVI port	No
Audio (L/R) in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format system	NTSC 3.58, NTSC 4.43, NTSC M, PAL, PAL 60, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM, SECAM B, SECAM D, SECAM G, SECAM K1, SECAM L
Supported graphics resolutions	800 x 600 (SVGA)
RMS rated power	2 W
Product type	Standard throw projector
Product color	Black
Market positioning	Presentation
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	235 W
Noise level	32 dB
Certification	CB, CCC, PSB, C-tick, KC, SASO, CE, GOST-R, Ukr, ErP, SVHC list & REACH DoC, UL, FCC (including ICES-003), cUL/CSA, Argen, NOM
Noise level (economic mode)	30 dB
Storage temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 80 %
Cables included	AC, VGA
Sustainability certificates	RoHS

Weight and Dimensions

Depth	234 mm
Width	284 mm
Height	82 mm
Weight	2600 g
Package weight	3400 g