EasyManuals Logo

ViewSonic PJD5133 User Manual

ViewSonic PJD5133
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Replacing the Lamp
As the projector operates over time, the brightness of the projector lamp gradually
decreases and the lamp becomes more susceptible to breakage. We recommend
replacing the lamp if a warning message is displayed. Do not attempt to replace the
lamp yourself. Contact the qualified service personnel for replacement.
The lamp is extremely hot right after turning off the projector. If you touch the
lamp, you may scald your finger. When you replace the lamp, wait for at least
45 minutes for the lamp to cool down.
Do not touch the lamp glass at any time. The lamp may explode due to
improper handling, including the touching of the lamp glass.
Lamp lifetime may differ from lamp to lamp and according to the environment
of use. There is no guarantee of the same lifetime for each lamp. Some lamps
may fail or terminate their lifetime in a shorter period of time than other similar
lamps.
A lamp may explode as a result of vibration, shock or degradation as a result of
hours of use as its lifetime draws to an end. Risk of explosion may differ
according to the environment or conditions in which the projector and lamp are
being used.
Wear protective gloves and eyeglasses when fixing or detaching the lamp.
Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at least
for 5 minutes to turn off the projector after powering on.
Do not operate the lamp in proximity to paper, cloth, or other combustible
material nor cover it with such materials.
Do not operate the lamp in an atmosphere containing an inflammable
substance, such as thinner.
Thoroughly ventilate the area or the room when operating the lamp in an
oxygen atmosphere (in the air). If ozone is inhaled, it could cause headaches,
nausea, dizziness, and other symptoms.
The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury
inside the lamp will be exposed. Leave the area immediately if the lamp
shatters while being operated and ventilate the area for at least 30 minutes in
order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to
user’s health.
34

Other manuals for ViewSonic PJD5133

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ViewSonic PJD5133 and is the answer not in the manual?

ViewSonic PJD5133 Specifications

General IconGeneral
Matrix size0.55 \
Number of colors16.78 million colors
Native aspect ratio4:3
Projection distance1.2 - 10 m
Vertical scan range50 - 120 Hz
Projection technologyDLP
Supported aspect ratios4:3, 16:9, 16:10
Contrast ratio (typical)2000:1
Screen size compatibility27 - 300 \
Projector native resolutionSVGA (800x600)
Keystone correction, vertical± 40 °
Power LEDYes
Audio input1
Aspect ratio16:10
CompatibilityPC, Mac
Dimensions (WxDxH)284 x 234 x 82 mm
Connectivity technologyWired
FocusManual
Optical zoom1.1 x
Focal length range- mm
Lamp power180 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source5000 h
Service life of light source (economic mode)6000 h
DVI portNo
Audio (L/R) in0
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Supported video modes1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format systemNTSC 3.58, NTSC 4.43, NTSC M, PAL, PAL 60, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM, SECAM B, SECAM D, SECAM G, SECAM K1, SECAM L
Supported graphics resolutions800 x 600 (SVGA)
RMS rated power2 W
Product typeStandard throw projector
Product colorBlack
Market positioningPresentation
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.1 W
Power consumption (typical)235 W
Noise level32 dB
CertificationCB, CCC, PSB, C-tick, KC, SASO, CE, GOST-R, Ukr, ErP, SVHC list & REACH DoC, UL, FCC (including ICES-003), cUL/CSA, Argen, NOM
Noise level (economic mode)30 dB
Storage temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 80 %
Cables includedAC, VGA
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth234 mm
Width284 mm
Height82 mm
Weight2600 g
Package weight3400 g

Related product manuals