ViewSonic X1 User Manual

43
Menu Option Description
Auto Power On
Signal
Selecting HDMI allows the projector to turn on automatically
once the HDMI/USB C signal is fed through the HDMI/USB C
cable.
CEC
This projector supports CEC (Consumer Electronics Control)
function for synchronized power on/off operation via HDMI
connection. That is, if a device that also supports CEC function
is connected to the HDMI input of the projector, when the
projector’s power is turned off, the power of the connected
device will also be turned off automatically. When the power
of the connected device is turned on, the projector’s power
will be turned on automatically.
NOTE:
• In order for the CEC funcon to work properly, make sure
that the device is correctly connected to the HDMI input
of the projector via an HDMI cable, and its CEC funcon is
turned on.
• Depending on the connected device, the CEC funcon may
not work.
Direct Power On
Allows the projector to turn on automatically once power is fed
through the power cord.
Smart Energy
Auto Power Off
Allows the projector to turn off automatically after a set
period of time once no input source is detected to prevent
unnecessary waste of light source life.
Sleep Timer
Allows the projector to turn off automatically after a set period
of time to prevent unnecessary waste of light source life.
Power Saving
Lowers power consumption if no input source is detected.
When Enable is selected, the projector light source mode will
change to Eco mode after no signal is detected for five (5)
minutes. This will also help prevent any unnecessary waste of
light source life.

ViewSonic X1 Specifications

General

Number of colors	1.07 billion colors
Native aspect ratio	16:9
Projection distance	1.53 - 4.98 m
Vertical scan range	23 - 120 Hz
Horizontal scan range	15 - 135 kHz
Projection technology	LED
Screen size compatibility	60 - 150 \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	40 °
Service life of light source	30000 h
Throw ratio	1.15 - 1.5
Zoom capability	Yes
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	3
Bluetooth version	4.2
Internal storage capacity	16 GB
Noise level	31 dB
Number of OSD languages	24
Noise level (economic mode)	27 dB
On Screen Display (OSD) languages	CHI (SIMPL), DUT, ENG, ESP, FIN, FRE, ITA, JPN, POL, RUS, THA, TUR
Cables included	Power, USB Type-C
Operating temperature (T-T)	0 - 40 °C
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 / 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	218 W
Product type	Standard throw projector
Product color	White
Market positioning	Home cinema
RMS rated power	12 W

Weight and Dimensions

Depth	244 mm
Width	355 mm
Height	121 mm
Weight	3600 g
Package depth	376 mm
Package width	490 mm
Package height	413 mm
Package weight	5500 g