ViewSonic X1 - Page 50

50
Menu Option Description
HDMI Settings
HDMI Format
Select a suitable color space according to the color space
setting of the output device connected.
 Auto: Sets the projector to detect the color space seng
of the input signal automacally.
 RGB: Sets the color space as RGB.
 YUV: Sets the color space as YUV.
HDMI Range
Select a suitable HDMI color range according to the color range
setting of the output device connected.
 Auto: Sets the projector to detect the HDMI range of the
input signal automacally.
 Enhanced: Sets the HDMI color range as 0 - 255.
 Normal: Sets the HDMI color range as 16 - 235.
Light Source Settings
Light Source Mode
 Normal: Provides full light source brightness.
 Eco: Reduces light source power consumpon by 20%
and lowers brightness to extend the light source life and
decreases the fan noise.
 Dynamic Black 1: Reduces light source power
consumpon by up to 70% depending on the content
brightness level.
 Dynamic Black 2: Reduces light source power
consumpon by up to 50% depending on the content
brightness level.
 Custom: Allows you to adjust the light source power.
Light Source Power
Only available when Light Source Mode is
Custom.
Reset Light Source Hours
Resets the light source timer after a new light source is
installed. For changing the light source, please contact qualified
service personnel.
Light Source Hours Information
 Light Source Usage Time: Displays the number of hours
the light source has been used.
Restart Smart System
Restarts the Smart System immediately after selecting Reset.