11
Area management
• Touching and selects the time slot for changing the temperature level.
• Touching and selects the desired temperature level; the histogram will be updated.
The procedure must be repeated for all the time slots to be changed, then confirm with .
• To copy the setting of the level of a time slot to another one/others, touch the icon.
• Select another day of the week by touching and proceed as above; using it is possible to
assign the day displayed with the program of any other day of the week; by touching select the day to
copy from and confirm with .
With the touchscreen you can change the HVAC programs for automatic control of the heating and air-conditioning
previously configured on the control panel.
The personalization consists, for each day of the week, of setting the value of the temperature levels T1, T2 and
T3; in the heating and air-conditioning programs the values T1, T2 and T3 are differentiable.
Touching activates the automatic program; then touching brings up the screen for editing
the program.
To Next Page
Loading...
Need help?
General