Vimar ELVOX 7559 - Page 11

11
TAB: 7559
EN
Actuations context
For conguration see the relative paragraph. In the previous gure T1 was re-congured as an icon and was associated
to a function other than default. When pressed, keys T1..T4 run the explicitly set or default function. The icons shown
on T2..T4 are the default settings, unless otherwise selected by the installer. When they are pressed the timeout (15 s)
starts again, and no other controls can be given. The C
key forces immediate exit.
The same menu can be recalled during:
• Self-start
• Calls
• Conversation with outdoor unit, another internal unit or the porter switchboard
In these cases, if more than one functions of T1..T3 in the Actuations context has been recongured, the icon corre-
sponding to T4 changes as shown in the following gure:
Re-congured actuations
Press T4 to view the same menu with the internal unit in standby, the di󰀨erence being that key C
now leads to the
menu which appeared before pressing T4. Hereafter refer always to the default programming.