Vimar ELVOX - Local Configuration; Storage; Set Fisheye Parameters

IP camera management
37
EN
4.1.3 - Local Conguration
GotoCong
System LocalCong.Youcansetthestoragepathofthecapturedpicturesandvideorecords.
4.1.4 - Storage
GotoCong System Storagetogototheinterfaceasshownbelow.
ThersttimeyouusetheSDcard,youshouldclick"Format",buttontoformattheSDcard.Click"Popup"buttontostopwritingdatatoSDcard.Then
theSDcardcanbeejectedsafely.
Note: usingofSDcardfunctionshouldbecoordinatedwithmotionorsensoralarm.Whenalarmistriggered,thesystemwillautomaticallycapture
pictureandsavethepictureorrecordintoSDcard.
GotoCong
System Recordtogototheinterfaceasshownbelow.YoucansettheSDcardrecordstream.Settheprerecordtimeifyou
enableprerecord.Click"Save"buttontosavethesettings.
Pre record time: Setthetimetorecordbeforetheactualrecordingbegins.
4.1.5 - Set sheye parameters
Beforeviewingtheliveimage,pleasegotoCong
System Fisheyeparametersmenutosetthestreammodeandinstallationmethod.
Streammode:Fisheye+Panoramicview+3PTZ&Fisheyeor4PTZmodeareoptional.Installationmethod:Wall,ceilinganddesktopareoptional.
Pleaseselecttheinstallationmodeaccordingtotheactualinstallationmethod.