Vimar ELVOX - Ddns Configuration; Snmp

IP camera management
45
EN
4.5.4 - DDNS Conguration
IfyourcameraissettousePPPoEasitsdefaultnetworkconnection,DDNSshouldbesetfornetworkaccess.BeforeyousettheDDNS,pleasemake
sureyouhaveregisteredadomainnameontheDDNSserver.
1-GotoCong Network DDNS
2-Applyforadomainname.Takewww.dvrdyndns.comforexample.Inputwww.dvrdydns.comintheIEaddressbartovisititswebsite.Thenclick“Reg-
istration”button
Createdomainname
Afteryousuccessfullyrequestyourdomainname,youwillseeyourdomaininthelist.
3-Inputtheusername,password,domainyouapplyforintheDDNScongurationinterface.
4-Click“Save”buttontosavethesettings.
4.5.5 - SNMP
Togetcamerastatus,parametersandalarminformationandremotelymanagethecamera,youcansettheSNMPfunction.BeforeusingtheSNMP,
pleasedownloadtheSNMPsoftwareandsettheparametersoftheSNMP,suchasSNMPport,trapaddress.
1-GotoCong Network SNMP.