22
To change the value of T2 and T3, repeat the instructions indicated in
paragraph 8.1.2.
At the end of the settings of the temperature levels, the daily program
diagram will be displayed again.
About 10 seconds after the last setting, the equipment automatically
ends the operation, storing all the settings.
Insert again the body of the equipment.
8.2 AIR-CONDITIONING program
Take out the body of the equipment.
MALU
048121620
ME GI VE SA DO ON
T3
T2
T1
8.2.1
Press the pushbutton
and select the
AIR-CONDITIONING
program
.
23
8.2.2
Press the pushbutton : the
range of temperatures of T1
and the temperature value to
be changed are displayed. Set
the desired temperature value
pressing the pushbutton
or .
Press the pushbutton to confirm the operation and to proceed with
the next temperature value.
To change the value of T2 and T3, repeat the instructions
indicated in paragraph 8.2.2.
At the end of the settings of the temperature levels, the daily program
diagram will be displayed again.
About 10 seconds after the last setting, the equipment automatically
ends the operation, storing all the settings.
Insert again the body of the equipment.
MALU
048121620
ME GI VE SA DO ON
T3
T2
T1
90716577.L.E 19-09-2003 8:49 Pagina 22
To Next Page
Loading...
