Vimar Idea 16577 - Display of the Temperature Levels; Installation Working Time

MALU
048121620
ME GI VE SA DO ON
T3
T2
T1
12.2.2
Press the pushbutton if
you wish to restore the
AUTOMATIC operating
mode before the end of the
countdown.
34
13. Installation working time
The equipment is provided with a timer to count the installation
working hours (till 9,999 hours).
MALU ME GI VE SA DO ON
T3
T2
T1
048121620
13.1
Press the pushbutton to
select the MANUAL operating
mode.
Take out the body of the
equipment.
Press the pushbutton :
the installation working time is
displayed for about 5 seconds.
35
13.2
To reset the timer and start
a new count, press the
pushbutton while the
figures of the installation
working time are still
displayed.
Insert again the body of the equipment.
MALU ME GI VE SA DO ON
T3
T2
T1
048121620
14. Display of the temperature levels
Take out the body of the equipment.
MALU
048121620
ME GI VE SA DO ON
T3
T2
T1
14.1
Press the pushbutton : the
temperature range of T1 and
the value assigned to it are
displayed.
90716577.L.E 19-09-2003 8:49 Pagina 34