33
12.2.1
Press twice the
pushbutton : d01 is
displayed.
Set the desired number of
days pressing the
pushbutton or (from 1
to 99 days).
Note
The day in which the setting is done is included in the countdown and
is considered a whole day.
MALU
048121620
ME GI VE SA DO ON
T3
T2
T1
12.1.2
Press the pushbutton if
you wish to restore the
AUTOMATIC operating
mode before the end of the
countdown.
MALU
048121620
ME GI VE SA DO ON
T3
T2
T1
12.2 Programming by days
Make sure the ANTIFREEZE operation is in use and set the
desired temperature (see paragraph 11).
32
12.1.1
Press once the
pushbutton : h01 is
displayed.
Set the desired number of
hours pressing the
pushbutton or (from 1
to 99 hours).
Note
The hour in which the setting is done is included in the countdown
and is considered a whole hour.
12. TIME-DELAY ANTIFREEZE operation
The time-delay antifreeze operation is used to maintain a safety
temperature for a certain time (hours or days): once the desired time
has been set, the equipment starts a countdown and after that the
AUTOMATIC operating mode is restored.
12.1 Programming by hours
Make sure the ANTIFREEZE operating mode is in use and set
the desired temperature (see paragraph 11).
MALU
048121620
ME GI VE SA DO ON
T3
T2
T1
90716577.L.E 19-09-2003 8:49 Pagina 32
To Next Page
Loading...
