Vimar Idea 16577 - Exclusion of the Installation

36
Repeat the operation indicated in paragraph 14.1 to display the
levels values of T2 and T3.
Press the pushbutton to end the operation.
Insert again the body of the equipment.
It is also possible to operate as follows: make sure the
AUTOMATIC operating mode is in use.
MALU
048121620
ME GI VE SA DO ON
T3
T2
T1
14.2
Press the pushbutton or
the temperature values
assigned to each level are
diplayed.
If necessary, restore the
temperature level of the
present hour.
37
15. Exclusion of the installation
The chronothermostat can also be used only as a thermometer and a
clock, excluding any control on the heating or on the air-conditioning
installation. This operating mode is particularly useful in case the
equipment is not in use for a long period, in case of maintenance or
of a long absence, etc.
15.1 Exclusion of the installation during the
HEATING program
MALU
048121620
ME GI VE SA DO ON
T3
T2
T1
15.1.1
Press twice the
pushbutton : s instead of
the daily program diagram,
the indicator under the
symbol is displayed,
confirming the exclusion
of the temperature control.
The ambient air temperature disappears for about 5 seconds and the
symbol is displayed.
90716577.L.E 19-09-2003 8:49 Pagina 36