Vimar Idea 16577 - Cancellation of the Own Programs; Restart

43
18.1
Press the pushbutton .
Insert again the body of the equipment.
Note
After each restart, the clock of the chronothermostat must be set
again.
18. Restart
Anomalies in the operation maintenance or technical troubles may
require the restart of the microprocessor. To restart, act as follows:
Take out the body of the equipment.
MALU
04812 16 20
ME GI VE SA DO ON
T3
T2
T1
17.1
Press the pushbutton and,
at the same time, the
pushbutton .
Stop first the pressure on the
pushbutton and, after the
pushbutton .
Insert again the body of the equipment.
MALU
04812 16 20
ME GI VE SA DO ON
T3
T2
T1
17. Cancellation of the own programs
If you wish to restore the equipment to its starting set of data and
programs, act as follows:
Take out the body of the equipment.
42
90716577.L.E 19-09-2003 8:49 Pagina 42