Vingtor Stentofon ACM-M-A-V2 - Trunk Lines

A100K 10430 v.1.0 ACM Telephone System – AMC-M-A Page 17
4.4 Trunk Lines
Table 6 Trunk lines example
z Directory No.
- The number to dial to get external trunk line.
z SIP type
- The SIP gateway used for the trunk.
Possible types are MP-114 and MP-118.
- FXO is the supported analogue telephone interface from the MP
gateways.
z Node
- The AlphaNet node number used for the SIP gateway. Default is 2.
z Line
- The line number for the trunk
z Incoming
- The extension the incoming calls on the trunk is placed to.
z Display text
- The display text that is shown in the ACM station for incoming calls
on the trunk
z Terminal block X6
- The physical position used for the trunk on the terminal block
z Additional functions
- Add information if incoming calls shall be placed in parallel or
sequential order if multiple stations shall receive the incoming call.
If calls shall be placed in parallel to stations, these calls must be
members of same ringing group.
TRUNK LINES:
FXO Terminal block
Dir.
No: SIP type Node Line Incoming Display Text
A B
Additional functions
001 FXO MP-114 2 1 6701 Trunk 1 Basic 1 2
002 FXO MP-114 2 2 6701 Trunk 2 Basic 3 4
003 FXO MP-114 2 3 101 Trunk 3 Extra 5 6
004 FXO MP-114 2 4 101 Trunk 4 Extra 7 8