A100K 10430 v.1.0 ACM Telephone System – AMC-M-A Page 25
6.5 Configure User Settings
This chapter describes how to program the system user and station
directory in order to comply with marine requirement for emergency two
way communication. The chapter is divided in the following parts:
z General user settings
z Program different class of service for users
z Program call priority
Before you will be able to program the user and station directory, the
Program and Cable Reference List must have been filled in. See
chapter Error! Reference source not found..
6.5.1 General user settings
z Click on the User & Stations icon in AlphaPro.
The main field for a normal configuration is:
- Physical Number
- Directory Number
- Display Text
- Station Type
- Volume Setting
- Group Access Level
- Call Setup Priority
- Class of Service
Figure 25 Station configuration window
‘Physical Number’ - all stations are identified by the exchange with its
physical number.
The physical number for a star wired station is the number of the
physical wire connection point on the ATLB-12 card. See chapter 3.5.1
for overview of physical numbers.
‘Directory Number’ is the number to dial to reach the station.
The default number can be changed to any 2-8 digit number starting
To Next Page
Loading...