Page 30 ACM Telephone System – AMC-M-A A100K 10430 v.1.0
8 SPESIFICATIONS
Dimension (mm)
600W x 600H x 350D
Weight
45 kg
Mounting
Wall mounted
Temperature range
0 - 55°C (recommended 18 - 25°C)
Power
230 VAC mains; max. power 150 W
24 VDC emergency; max power 150 W
Automatic switchover between mains
and emergency
IP class
IP 20
Subscriber capacity
60 analogue telephones
6 intercom stations
Call capacity
Max 12 concurrent calls
PA interface
0 dB/600Ω audio
1 relay to signal PA calls
External interface and
billing
Option analogue telephone gateway
Option GSM telephone gateway
Option VINGTOR Billing system
IP multi-module
Up to 2 system racks
Data interfaces
2 x 10/100 Mbps Ethernet AutoMDIX
(RJ45)
1 x RS232 serial data (RJ45)
Data networking
Option 4 port industrial data switch
Option 5 port industrial power over
Ethernet switch
IP protocols
IP unicast - IP multicast - IP v4 - TCP -
UDP - Telnet - FTP – TFTP - NTP –
HTTP - HTTPS - Syslog - SNMP v2c -
SIP - RTP -RTCP - VoIP AlphaNet -
STENTOFON data – OPC
Remote system
management
AlphaPro over IP
Web
8.1 Environment Requirements
The ACM system has been tested and fulfills all requirements according
to EN 60945 and IACS E10 standards.
z Rack Temperature: 0°C to +55°C
z Humidity: >95% RH @ 25°C / 93% RH @ 55°C
z Compass safety: Distance to ACM-rack: 325 cm
Distance to telephones: 95 cm
Note ! It is strongly recommend to install the rack in a ventilated
technical instrument room with temperature between 18°C and
25°C. This will increase the system life time.
To Next Page
Loading...