Vinten Vector 70 - Page 81

81
Contents
Previous
Page
First
Page
Next
Page
Previous
View
3354-37 Tilt cover/centre lock assembly, comprising: 1
30 3354-258 Centre lock plunger 1
31 L801-106 Pin, dowel, 1/8 in. dia. x 3/4 in. long 1
32 J532-165 Spring, compression, 0.500 in. free length, 0.180 in. OD x 0.188 in.
hole dia., 7.00 lbf/in. rate
1
33 3354-256 Tilt housing cover R.H 1
34 3354-259 Centre lock release lever 1
35 M801-048 Pin, dowel, 5 mm dia. x 12 mm long 1
36 3354-260 Spring, Centre lock release lever 1
37 M005-716 Screw, cap head, socket, M4 x 8 mm long 1
38 3354-424 Buffer pad 2
39 3354-33* Tilt brake shoe bonding assembly 1
40 J532-145 Spring, compression, 0.500 in. free length, 0.300 in. OD x 0.313 in. hole
dia., 46.00 lbf/in. rate
1
41 3354-257 Tilt back plate 1
42 M004-807 Screw, grub, knurled cup point, socket head, M3 x 5 mm long 2
43 3354-249 Connecting link (Fig 6.5) 1
44 3354-283 Pin (Conn. Link/bell crank) 1
45 3354-288 Lining (Tilt brake reactor) (Part of 3354-13/3354-43) 1
Fig 6.10 Vector 70/70H Pan and Tilt Head - Tilt Brake/Balance Knob/Centre Lock
Item Part No Nomenclature Qty