Vinten Vector 70 - Page 88

88
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.13 Vector 70/70H Pan and Tilt Head - Wedge adaptor assembly
Item Part No. Nomenclature Qty
3389-3 Automatic wedge adaptor, comprising: 1
1 3389-301 Body 1
2 L850-054 Threaded-insert, wire thread insert (helicoil), 3/8 in. BSW x 2
Diameters long
2
3 3389-21 Handle assembly (10mm pivot) 1
4 J532-159 Spring, compression, 0.750 in. free length, 0.180 in. OD x 0.188 in.
hole dia., 17.00 lbf/in. rate
1
5 M806-004 Pin, coiled-spring, 4 mm dia. x 10 mm long, hdp 1
6 3389-210 Washer 1
7 3389-208 Swing Arm 1
8 3389-212 Screw head spacer 1
9 M006-911 Screw, countersunk head, socket, M5 x 12 mm long 1
10 L801-103 Pin, dowel, extractable, 1/4 in. dia. x 1/2 in. long 1
11 3389-310 Running plate 1
12 3389-206 Shaft 1
13 J532-161 Spring, compression, 1.516 in. free length, 0.473 in. OD x 0.792 in.
hole dia., 109.744 lbf/in. rate
1
14 3389-205 Pivot bush 1
15 M600-004 Washer, plain, heavy, M4 1
16 M005-513 Screw, button head, socket, M4 x 6 mm long 1
17 3389-304 Lever pivot (10mm diameter) 1
18 3389-302 Lever mounting (adjustable 10mm pivot) 1
19 M006-812 Screw, grub, dog point, socket head, M5 x 8 mm long 1
20 M701-002 Circlip, external, standard, 5 mm shaft dia. x 0.60 mm thick 1
21 M100-003 Stud, self-clinching, M6 thread x 12 mm long 1
22 3389-309 Name label