Vinten Vector 70 - Page 89

89
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.14 Vector 70/70H Pan and Tilt Head - Composite Spare Parts
Part No Nomenclature Qty
3354-914SP Seal kit, comprising:
3354-412 Gasket 1
3354-414 Inner gasket 1
R200-004 Seal, bonded, M4, 4.5 mm ID x 7.0 mm OD x 1.0 mm thick 1
R900H001 ’O’ ring, 7.1 mm ID, Dowty 202-509-4470
R900H002 ’O’ ring, 15.1 mm ID x 1.6 mm sect, Dowty 202-517-4470 1
R900H018 ’O’ ring, 3.1 mm ID x 1.6 mm sect, Dowty 202-505-4460 3
R900H019 ’O’ ring, 21.1 mm ID x 1.6 mm sect, Dowty 202-514-4460 1
R900H020 ’O’ ring, 22.1 mm ID x 1.6 mm sect, Dowty 202-524-4470 1
Q001-014 'O'-Ring, 3/8 in. nominal ID x 0.070 in. section, hardness 70 IRHD 1
Q001-015 'O'-Ring, 5/16 in. nominal ID x 0.103 in. section, hardness 75 IRHD 1
Q500-040 'Omniseal', 1.380 in. shaft dia. x 3/32 in. nominal section 1
Q500-051 'Omniseal', 2.127 in. shaft dia. x 3/32 in. nominal section 1
Q500-052 'V'-Seal, to fit 6.5 to 8 mm shaft dia. 1
Q900H039 ‘O’ ring, 1/4 in. ID x 3/8 in. OD, Dowty 200-010-4460 1
Q900H040 ’O’ ring, 4.75 in. ID x 0.0625 in. sect, Dowty 200-048-4460 1
R900H009 ’O’ ring, 9.1 mm ID x 1.6 mm sect, Dowty 202-511-4470 1
3354-915SP Bearings kit, comprising:
N001-043 Bearing, plain, du bush, 1/4 in. ID x 5/16 in. OD x 3/8 in. long 10
N001-044 Bearing, plain, du bush, 1/4 in. ID x 5/16 in. OD x 1/4 in. long 4
N552-019 Bearing, needle roller, thrust, 0.502 in. ID x 0.927 in. OD x 0.078 in. long,
with cage assembly
1
N552-020 Washer, thrust, bearing, 0.502 in. ID x 0.927 in. OD x 0.030 / 0.032 in. thick 2
P001-018 Bearing, plain, du bush, 8 mm ID x 10 mm OD x 12 mm long 4
P003-001 Bearing, plain flanged, plastic, 8 mm ID x 10 mm OD x 5.5 mm long 2
P200-229 Bearing, ball, radial, 45 mm ID x 58 mm OD x 7 mm long, open 1
P302-016 Bearing, ball, radial, 20 mm ID x 32 mm OD x 7 mm long, two seals 5
P302-017 Bearing, ball, radial, 30 mm ID x 42 mm OD x 7 mm long, two seals 1
P600-014 Bearing, needle roller, radial, 19 mm ID x 27 mm OD x 20 mm long
P600-015 Roller, cylindrical, 5 mm x 8 mm long 24
P603-003 Bearing, track roller, yoke type, - mm bore dia., 16 mm roller dia. x 7.8 mm
roller width
4