• Enter Parking Mode Timer:
Set the timer for entering parking mode. (Only for hardwire cable, if you
use external battery, this function will not work.)
"OFF" means the camera will enter parking mode right away when the
engine is off.
"90s" means the camera will enter parking mode 90 seconds after engine
is off.
• Parking G-Sensor:
Adjusts the sensitivity of the motion detection so minor motion caused by
wind or rain doesn't trigger a recording.
Turn the image upside down. You can set the camera image rotation.
The G-sensor detects significant or sudden movement (such as an
impact or collision), it will trigger an event recording. We suggest
setting it to High sensitivity in parking mode recording.
• Parking Motion Detection:
• Image Rotate:
• Notification Sounds:
Off / Button beep only / Startup sound only / All on.
You can enable/disable the button and startup sounds.
• Voice Notification:
turn on / off the voice notification.
• GPS:
Turn on / off GPS logger. A GPS module is used to include the location
data in the recorded videos. If disabled, your camera will no longer
measure your speed and position; nor synchronize the time / date.
(Only available when connecting with GPS signal) Please use “Dashcam
Viewer” to playback videos and to visualize your position and speed on
your computer.
• Speed Unit:
Kilometer per hour (KMH) and miles per hour (MPH) are available for
speed unit.
• GPS Info Stamp:
Imprint the GPS information on the recorded video.
• Camera Model Stamp:
Imprint the camera model on the recorded video.
• Frequency:
Set it to minimize flickering and banding in the recorded video.
• Format SD Card:
The operation will delete all data on the MicroSD card.
Note: Once you format the card, all information will be deleted and
unrecoverable. Make sure you back up all files that you need before
formatting.
23 24
• Parking Recording Timer:
"Off" means the camera will keep recording until the hardwire kits cut the
power supply.
"1 hour" means the camera will shut down after it gets into parking mode
for 1 hour.
Change the image reversely.
• Image Mirror:
To Next Page
Loading...
