2. Select a location on the windshield behind the rear-view mirror
where the camera will not obstruct the driver’s view while driving.
6. Adjust the Bracket Angle
Adjust the angle (about 60°) of the bracket up / down according
to the needs of video recording.
7. Connect to Power
Insert the car charger USB cable’s male port into the camera
mount's USB Type-C port. Plug the USB power adapter into your
vehicle’s 12V / 24V female power socket.
3. Wipe clean the installation surface of the windscreen with a dry
cloth, it must be grease free for the sticky pad to stick firmly.
4. Peel the protection film off the sticky pad and camera lens.
5. Fix the camera on the selected location.
2
109
Connect to car
cigarette lighter socket
Best mounting location
1
60°
To Next Page
Loading...
