47
Camera shall be intensively recorded at Pre-record IPS. Press +/- buttons to
adjust the value. Please note that the actual pre-record time may be shorter than
the value set if the total size of the pre-record pictures exceeds the pre-record
buffer size of the system.
! Post-record – to define how long after this alarm input is triggered the Focus
Camera shall be intensively recorded at Event Record IPS. Press +/- buttons to
adjust the value.
! Alarm Out – to define which Alarm Output will be triggered when this alarm
input is triggered. Press +/- buttons to select none (N/A) or one of the Alarm
Outputs.
! Buzzer – to activate the internal Buzzer or not when this alarm input is triggered.
Press ENTER or +/- to check/uncheck this item. The default setting is “ˇ” -
checked.
! Log – to log to event logs or not. Press ENTER or +/- to check/uncheck this
item. The default setting is “ˇ” - checked.
! Screen Message – to display the event message on the screen or not. Press
ENTER or +/- to check/uncheck this item. The default setting is “ˇ ” -
checked.
! Notification – to notify mobile phones and/or send the event e-mail to remote
station or not. The mobile phones with alarm notification from the DVR enabled
will be notified, and the e-mail will be sent to the predefined receivers when the
event is triggered. Press ENTER or +/- to check/uncheck this item. The
default setting is “ˇ” - checked.
! FTP – to send the recorded event video/audio files to FTP server or not. Press
ENTER or +/- to check/uncheck this item. The default setting is “– ” -
unchecked.
To Next Page
Loading...