71
6.10.1 Notification Setup
In Network Setup,
press ENTER to
call up Notification
Setup as shown
when the
highlighted option
is Notification.
The Notification
Setup allows the
administrator to set
notification (email
& push alarm)
related parameters.
When an event
occurs and Notification/E-mail is enabled for the corresponding action, a notification
will be sent based on the parameters set.
The general operations are as below:
! ▲▼(Mouse: Left click)
Press these buttons to select the items.
! ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Network Setup display.
If the Save dialog is shown, press ENTER to exit and save, ESC (Mouse:
Right Click) to exit without saving.
Following is a brief description for each item and its specific operations:
! SMTP Server – SMTP mail server name. Please follow the Text Input method
described in Section 4.1 to modify this item.
! SMTP Port – the SMTP port for e-mail transmission. The default value is 25.
Please follow the Text Input method described in Section 4.1 to modify this item.
! Authentication – whether the SMTP mail server requires authentication. Press
ENTER or +/- to check/uncheck this item.
! Username – username if the SMTP mail server requires authentication. Please
follow the Text Input method described in Section 4.1 to modify this item.
To Next Page
Loading...