62
The general operations are as below:
! ▲▼◄►
Press these buttons to move the focus. If the selected item is not shown on
the screen, the screen will scroll up or down.
! ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Password Setup
display. The Password Setup contents will be updated accordingly.
Following is a brief description for each item and its specific operations:
! Monitor Channel 1-16 – the user can only monitor those channels “checked”.
Press ENTER or +/- (Mouse: Left click) to check/uncheck this item.
! X2 – to enable the user to do X2 operation for live/playback video if
“checked”. Press ENTER or +/- (Mouse: Left click) to check/uncheck
this item.
! PTZ – to enable the user to do PTZ operation if “checked”. Press ENTER
or +/- (Mouse: Left click) to check/uncheck this item.
! GPS/POS/OSD Display – to enable the user to change GPS/POS/OSD
Display if “checked”. Press ENTER or +/- (Mouse: Left click) to
check/uncheck this item.
! Volume – to enable the user to change volume if “checked”. Press ENTER
or +/- (Mouse: Left click) to check/uncheck this item.
! Video Adjustment – to enable the user to do video adjustment operation if
“checked”. Press ENTER or +/- (Mouse: Left click) to check/uncheck
this item.
! Display – to enable the user to change display settings if “checked”. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item.
! Playback – to enable the user to playback video/audio if “checked”. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item.
! Backup – to enable the user to backup video/audio if “checked”. Press
ENTER or +/- (Mouse: Left click) to check/uncheck this item.
! Configuration Backup/Restore – to enable the user to backup/restore
configurations if “checked”. Press ENTER or +/- (Mouse: Left click) to
check/uncheck this item.
To Next Page
Loading...