Viper 3000 Installation Guide

©
2005 Directed Electronics, Inc. 31
➤➤
Ignition is turned off.
➤➤
Door is closed.
➤➤
Valet/Program button is pressed too many times.
➤➤
More than 15 seconds elapse between steps.
Transmitter Configurations
The Auto Learn functions in the Transmitter/Receiver Learn Routine will program the transmitter
buttons to the following configuration.
Standard Configuration (2-Way LED Remote)
When programmed for standard configuration, the transmitter buttons are assigned to the
following functions:
operates Lock, Arm/Panic On/Panic Off
operates Unlock, Disarm/Panic Off
operates Channel 2 and Silent Mode
operates Panic On/Off
and operate Channel 3
and operate Channel 4
and operate Channel 5
and operate Channel 6

Viper 3000 Specifications

General

Model	Viper 3000
Category	Car Alarm
Remote Control	Yes
Number of Remotes Included	2
Door Lock Control	Yes
Trunk Release	Yes
Panic Mode	Yes
Valet Mode	Yes
Remote Start Ready	Yes
Range	1/4 Mile